You have been forwarded to product page in relevant to your search term.
Select a different country or region to see content for your location.
United States
18:40:51 GMT+0000 (Coordinated Universal Time)
ZKLF50140-2RS-XL
Axial angular contact ball bearing
Axial angular contact ball bearings ZKLF..-2RS, double direction, for screw mounting, lip seals on both sides
Replaces
ZKLF 50140.2RS, ZKLF50140-2RS
Product information
Main Dimensions & Performance Data
| d | 50 mm | Bore diameter |
0 mm | Bore diameter upper tolerance | |
-0,005 mm | Bore diameter lower tolerance | |
| D | 140 mm | Outside diameter |
0 mm | Outside diameter upper tolerance | |
-0,01 mm | Outside diameter lower tolerance | |
| B | 54 mm | Width |
0 mm | Width upper tolerance | |
-0,25 mm | Width lower tolerance | |
| Ca | 125.000 N | Basic dynamic load rating, axial |
| C0a | 250.000 N | Basic static load rating, axial |
| Cua | 15.200 N | Fatigue load limit, axial |
| nG Grease | 2.900 1/min | Limiting speed for grease lubrication |
| nϑ | 1.200 1/min | Thermally safe operating speed |
| MR | 2,6 Nm | Bearing frictional torque |
| ≈m | 4,393 kg | Weight |
Mounting dimensions
| Da max | 98 mm | Maximum diameter of housing |
| da min | 63 mm | Minimum diameter shaft |
| t1 | 0,2 mm | Position tolerance of bore in the housing |
M10 | Size of fixing screws | |
| na | 12 | Number of holes in adjacent construction |
| ta | 30 ° | Pitch separation angle of holes in adjacent construction |
M6 | Connection thread for lubrication |
Dimensions
| d1 | 80 mm | Rib diameter inner ring |
| rmin | 0,6 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
| J | 113 mm | Pitch circle diameter fixing holes |
| d2 | 11 mm | Fixing holes diameter |
| b | 3 mm | Width of extraction slot |
| I | 45 mm | Distance of extraction slot |
| n | 12 | Pitch quantity of fixing holes |
| t | 30 ° | Pitch separation angle of fixing holes |
| a | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 1.400 N/µm | Rigidity axial |
| ckL | 1.500 Nm/mrad | Tilting rigidity |
| Mm | 15,2 kg*cm2 | Mass moment of inertia |
2,5 µm | Axial runout | |
ZMA50/75 | Recommended INA precision locknut for radial locking | |
AM50 | Recommended INA precision locknut for axial locking | |
| MA | 150 Nm | Tightening torque for the recommended INA precision locknut |
28.451 N | Required locknut force axial |